HANNspree Flat Panel Television DT04 12U1 000 User Manual

9.6" Liquid Crystal Display  
12.1"  
Television  
User's Manual  
MAK-000001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Regulatory Information  
FCC Compliance Statement1  
This device complies with part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) This device may not cause  
harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
Additional Information  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses  
and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged  
to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment into an outlet on a circuit different from that  
to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help  
Warning: You are cautioned that changes or modifications not  
expressly approved by the party responsible for compliance could void  
your authority to operate the equipment.  
1. applies only to products purchased in the United States of America  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DOC Compliance Notice1  
This digital apparatus does not exceed the Class B limits for radio noise  
emissions from digital apparatus as set out in the Radio Interference  
Regulations of the Canadian Department of Communications.This  
device complies with Canada ICES-003 Class B.  
CE Conformity Statement2  
This device complies with the requirements set out in the Council  
Directive on the approximation of the Laws of the Member States  
relating to Electromagnetic Compatibility (89/336/EEC) and the  
Amendment Directive (92/31/EEC), Low-Voltage Directive (73/23/EEC)  
and the Amendment Directive (93/68/EEC).  
1. applies only to products purchased in Canada  
2. applies only to products purchased in the European Union  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Description of Warning Symbols  
Before You Proceed  
1. Read all Safety Notices in Section 2 of this manual and  
instructions in the User’s Manual carefully before either plugging  
in or turning the TV on.  
2. Keep this User’s Manual in a safe place for future reference.  
Keep the box and packaging in case the TV needs to be shipped  
in the future.  
3. Follow the TV and warning label instructions.  
4. Any uses, operations, changes, alterations or modifications of  
the TV that do not follow the instructions in this manual will void  
this TV’s warranty.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
WARNING  
CAUTION  
This symbol is used to alert  
users to pay attention to  
important descriptions  
regarding usage, maintenance  
(repair), and additional  
important information related  
to this TV.  
This symbol is used to alert  
users to the risk of electric  
shocks due to dangerous and  
uninsulated components.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
Safety Notices  
Electric Power Notice  
Electric power may cause personal injury and mechanical damage if  
misused. Although safety has been taken into consideration during the  
design and production of this TV, electric shock or fire can result if the  
TV is misused. To prevent potential danger, read and follow the  
instructions and warnings contained in this manual when setting up,  
operating or cleaning the TV. In addition, please read all “Safety  
Notices” contained in this manual carefully before using the TV.  
Power Supply Safety Notes  
1. To avoid electric shocks, do not use an extended power cord or  
an outlet that does not match this TV's plug or leaves the plug  
exposed.  
2. This TV has a 3-pin grounded plug. The third pin connects to  
ground; do not remove it or alter it in anyway.  
3. If the power cord or plug is damaged or worn, unplug it  
immediately and contact an authorized service technician for  
maintenance.  
4. To avoid fire or electric shocks, do not overload electric power  
outlets.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installation Safety Notes  
Antenna  
We suggest that you use an outdoor antenna to get the best signal  
possible unless you have cable TV or a centralized indoor antenna  
system. You may, however, use an antenna indoors if it is placed in a  
location free from interference.  
Location  
Avoid prolonged exposure to sunlight or other strong sources of heat.  
Leave sufficient distance between the TV and the wall to provide  
enough space for the emission of heat.  
WARNING  
To reduce the risk of fire or electric shock, do not expose this  
apparatus to rain or moisture.  
Apparatus shall not be exposed to dripping or splashing and no  
objects filled with liquids, such as vases, shall be placed on the  
apparatus.  
Power  
To avoid danger of fires or electric shock, only use those adapters  
listed below, which are compatible with this TV.  
EDAC POWER ELECTRONICS CO., LTD.: EA1050E-120  
LI SHIN INTERNATIONAL ENTERPRISE CORP.: 0217B1240  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
1
2
3
4
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
5
6
7
8
9
Do not use this apparatus near water.  
Clean only with dry cloth.  
Do not block any ventilation openings. Install  
in accordance with manufacturer’s  
instructions.  
Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding-type plug has two blades  
and a third grounding prong. The wide blade  
or the third prong are provided for your  
safety. If the provided plug does not fit into  
your outlet, consult an electrician for  
replacement of the obsolete outlet.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 Protect the power cord from being walked on  
or pinched, particularly at plugs,  
convenience receptacles, and the point  
where they exit from the apparatus.  
11 Only use attachments/accessories specified  
by the manufacturer.  
12 Use only with the cart, stand, tripod, bracket,  
or table specified by the manufacturer, or  
sold with the apparatus. When a cart is used,  
use caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
13 Unplug this apparatus during lightning  
storms or when unused for long periods of  
time.  
14 Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way,  
such as power-supply cord or plug is  
damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus  
has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
These servicing instructions are for use by  
qualified service personnel only.To reduce  
the risk of electric shock, do not perform any  
servicing other than that contained in the  
operating instructions unless you are  
qualified to do so.  
CAUTION  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Personal Safety  
To avoid overloading the power supply, never  
plug too many electrical devices into an outlet,  
power strip, or extension cable.  
Dangerous high-voltage electric power  
components are located inside the TV. To avoid  
electric shock, do not disassemble the TV in any  
way.  
Do not place or drop metals, small objects, or  
flammable materials into the vent of the TV.  
If the TV is dropped, falls down, or is otherwise  
damaged, unplug the power cord immediately  
and contact an authorized service technician.  
If any fluid is sprayed or dropped into the TV,  
contact an authorized service technician.  
The screen of the TV is made of glass. Avoid  
hitting or scraping it. If the screen is broken, do  
not touch the broken glass.  
Do not allow children to use the TV unattended.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Do not place the TV in locations where there is  
excessive steam or dust.  
Avoid blocking the TV's vents, do not place the  
TV on a bed, sofa, carpet, or in a sealed cabinet.  
Install the outdoor antenna (not included) away  
from power transmission lines to avoid possible  
danger.  
Unplug the power cord and antenna connector  
when there is a storm or when the TV is not in  
use for long periods to avoid electric shock from  
lightning.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
This TV is designed for home power sources as  
labeled on the casing. Avoid using any other  
power accessories to avoid electric shock or  
other damage.  
V
The plug can be inserted into an outlet in only  
one direction as shown to the left. Do not alter  
the plug. Contact an authorized service  
technician if you cannot plug it in correctly.  
If there is any problem that cannot be resolved  
according to the instructions given in this  
manual, contact an authorized service technician  
immediately. Do not attempt any methods not  
covered in this manual.  
Maintenance  
Do not attempt to repair the TV by yourself.  
Contact an authorized service technician. Ask  
the service technician to complete a safety  
inspection before switching the power on after  
completing any maintenance.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Preface  
Thank you for purchasing a Hannspree Liquid Crystal Display Television  
(LCD TV). Your new TV will allow you to enjoy superior audio and video  
while enriching your lifestyle with advanced technology.  
Please carefully read this manual in its entirety before setting up, using  
or operating your TV. To ensure the safe and correct installation and  
operations of the TV, it is important that the safety and operation  
instructions in this manual are followed.  
This instruction manual is designed to assist you in setting up and using  
the TV. The information in this manual has been carefully checked for  
accuracy; however, no guarantee is given to the correctness of the  
contents. The information in this manual is subject to change without  
notice.  
To the extent allowed by applicable law, Hannspree California Inc.  
(“Hannspree”) shall not be liable for direct, indirect, special, exemplary,  
incidental or consequential damages arising from any defect or  
omission in this manual, even if advised of the possibility of such  
damages in advance.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Copyright  
© Copyright 2004 Hannspree California Inc.  
All rights reserved. This manual is protected by copyright and  
distributed under licenses restricting its use, copying and distribution.  
No part of this manual may be reproduced in any form by any means  
without the prior written authorization of Hannspree. The TV described  
in this manual may include copyrighted software of Hannspree (or other  
third parties). Hannspree (or other third parties) preserves the exclusive  
rights for copyrighted software, such as the right to distribute or  
reproduce the copyrighted software. Accordingly, and to the extent  
allowed by applicable law, any copyrighted software contained in the  
product described herein shall not be distributed, modified, reverse  
engineered, or reproduced in any manner without the prior written  
authorization of Hannspree (or of other third parties).  
The Hannspree logos presented herein are trademarks of Hannspree.  
All other product names, trademarks or logos mentioned herein are  
used for identification purpose only, and may be the trademarks or  
registered trademarks of their respective owners.  
The purchase of the product described herein shall not be deemed to  
grant, either directly or by implication, estoppel or otherwise, any  
license under the copyrights, patents, patent applications or trademarks  
of Hannspree, except for the normal, non-exclusive use that arises by  
operation of law in the sale of a product.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Introducing the TV  
Thank you for purchasing this LCD TV. Your LCD TV is designed to be safe,  
versatile, and easy to use. The design makes it a fun addition to any room.  
You can watch broadcast or cable television channels, and easily connect a  
VCR, VCD or DVD player to the standard RCA and S-Video input ports that  
are included in the 4-IN-1 A/V cable.  
Convenient control buttons located on the TV and a handy remote control let  
you change channels, adjust the volume, and change display settings  
through an easy-to-use on-screen display menu system. The built-in stereo  
speakers provide full rich sound and a convenient audio output port lets you  
connect to an external audio system or headphones.  
Features  
Built-in TV tuner  
4-IN-1 A/V cable  
On-Screen Display (OSD) menu system  
Built-in stereo speakers  
Audio/Video support  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
6
Checking Package Contents  
Make sure the following components are included in the box. Please contact  
Hannspree Customer Service immediately if anything is missing or  
damaged.  
TV  
User’s manual  
Quick start guide  
Warranty and service manual  
Power cord  
Power adapter  
4-IN-1 A/V cable  
Remote control and battery/batteries  
RCA jack x 3  
S jack x 1  
Stop Card  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7
Getting Started  
Control Panel  
Description  
Icon  
Function  
Turns the TV on and off.  
/
Power  
Power  
Indicates power status.  
Power LED  
Selects the input source to be  
displayed  
(TV/CATV, AV1, or AV2).  
SOURCE / TV/AV /  
Source  
Menu  
TV  
Turns the On-Screen Display (OSD)  
menu on and off.  
MENU/M/  
Changes channels. Press channel  
up to increase the channel number.  
Press channel down to decrease the  
channel number. In PC or AV mode,  
press either button to return to TV  
mode.  
channel up  
(
/ S / X / +)  
Select  
channel  
channel down  
(
/ T / W / –)  
Press volume up to increase the  
audio volume. Press volume down to  
decrease the audio volume.  
volume up  
/ + / S / X)  
volume down  
(
Adjust  
volume  
(
/ – / T / W)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Input and Output Jacks  
Description  
Connector  
Function  
Connects to a right audio (red)  
or left audio (white) cable, or  
video (yellow) cable.  
AV1 (R-AUDIO/  
L-AUDIO/VIDEO)  
Use the included 4-IN-1 A/V  
cable to connect external  
devices, such as a VCR, VCD,  
DVD player, CVBS RCA  
cables or a game device.  
Audio Input: AV connector  
audio (white and red) cables.  
Video Input: AV connector  
video (yellow) or S-Video  
cable.  
AV2  
Connects to an antenna or  
CATV cable television line.  
ANT  
Connects to the included  
power adapter.  
DC-IN  
Connects to headphones or  
external speakers  
Headphone  
line out jack  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Remote Control  
Description  
Icon  
Function  
Press this button to activate the OSD  
menu system and to adjust various  
settings and personal preferences.  
MENU  
Menu  
Arrow  
MENU  
/
/
ENTER  
Press W and X to scroll through the  
on-screen display menus.  
Favorite channels can be selected  
using the W and X buttons on the  
remote control.  
W / X / < / >  
1
4
2
5
3
6
Use to select a channel directly.  
Press 0-9 to enter the channel  
number (press 1 and 0 for channel  
10).  
Number  
7
8
0
9
Press this button to return to the last  
channel selected.  
RECALL  
MTS  
Recall  
MTS  
Press this button to enable the  
bilingual function when the program  
has stereo/SAP/MONO capabilities.  
Power  
Turns the TV power on or off.  
-VOL VOL+  
VOL VOL  
VOL VOL  
VOL VOL  
Press volume up to increase the  
audio volume. Press volume down to  
decrease the audio volume.  
Adjust volume  
Mute  
Press this button to eliminate sound.  
Press mute again or press the  
volume adjust buttons to restore  
sound.  
MUTE  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Description  
Icon  
Function  
Changes channels. Press channel  
up to increase the channel number.  
Press channel down to decrease the  
channel number. In PC or AV mode,  
press either button to return to TV  
mode.  
CH CH  
CH CH  
CH CH+  
Select channel  
Press this button to cycle the video  
input sources. The source is  
displayed on the screen.  
SOURCE  
RESET  
Source  
Reset (selected  
models only)  
Press this button to reset the TV.  
Press this button to show messages  
on the screen, such as the channel  
number and other. Press this button  
again to show the real-time clock.  
Press this button again to close the  
displayed message.  
Display (selected  
models only)  
DISPLAY  
Press this button to enable the  
closed captions/subtitles (Only  
available with 15-inch TVs). This  
option may not be available in your  
local area.  
Caption  
(selected models  
only)  
CAPTION / CAPT.  
Press this button to automatically  
adjust the screen parameters in PC  
mode (only available with 15-inch  
TVs).  
Auto (selected  
models only)  
AUTO  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting the Remote Control Battery/Batteries  
Lithium battery/batteries  
1
Open the battery compartment cover at the  
back of the remote control (A).  
A
2 Slide the battery/batteries, with the positive  
(+) side facing up, underneath the shorter set  
of metal contacts (B).  
B
3 Press the battery/batteries firmly into place  
C
D
in the battery compartment (C)  
4 Replace the battery compartment cover (D).  
Note  
Your remote control may have either AAA type batteries or CR2032 lithium  
battery/batteries.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
AAA battery/batteries  
1
Open the battery compartment cover at the  
back of the remote control (A).  
A
B
C
2 Insert the battery/ batteries paying  
attention to the polarity markings inside  
the battery compartment (B).  
3 Replace the battery compartment cover  
(C).  
Note  
Your remote control may have either AAA type batteries or CR2032 lithium  
battery/batteries.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
If the remote control is not used for a long period, remove the batteries  
and store them separately.  
Handle damaged or leaking batteries carefully, and wash hands after  
such handling.  
If your remote control has two batteries, do not mix new and old  
batteries because the life of the new batteries will be shortened.  
Chemical fluids may leak from the old batteries.  
Danger of explosion if battery is incorrectly replaced. Replace only with  
the same or equivalent type recommended by the equipment  
manufacturer. Discard used batteries according to manufacturer’s  
instructions.  
Refer to your local recycling or waste disposal rules and contact a local  
waste disposal vendor to dispose of used batteries.  
The remote control may have a magnet in it, so do not place magnetic  
sensitive items such as watches, credit cards, or flash media close to  
the cover.  
Do not use force when pulling the remote control cover open; you may  
damage the hinge.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Making Connections  
Connecting to an Antenna or Cable TV  
1
Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT  
Jack (VHF/UHF IN Jack) on the back of the TV.  
2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to  
the antenna socket or CATV cable.  
Antenna  
ANT  
ANT jack  
(VHF/UHF IN jack)  
Antenna/CATV  
socket  
Antenna/CATV  
coaxial cable  
Note  
If you cannot receive channels after connecting to an antenna or cable TV  
line, try scanning for channels. See “Auto Program” on page 46.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting to AV Devices  
Connect external devices such as a VCR, VCD or DVD player, or video  
game console to the TV using the supplied 4-IN-1 A/V cable.  
Connecting to a VCR/VCD/DVD Player  
The illustration presented here shows how to connect the TV to a VCR,  
VCD or DVD player. Actual connections may vary according to the make  
and model of the device. Refer to the user’s manual included with the device  
for more detailed instructions.  
VCR  
DVD  
VCD  
AV2  
4-IN-1 A/V jack  
B
R W Y  
S-Video  
connector  
AV  
connectors  
4-IN-1 A/V cable  
Note  
The cables are color-coded (black, red, white, yellow). Connect each  
color-coded cable to the appropriate connector on your device.  
When connecting the S-Video connector and AV connector at the same  
time, the priority is given to the S-Video connector.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting to a Video Camera  
The instructions presented here are a general guide to connecting the TV to  
a camcorder or other type of digital camera. Actual connections may vary  
according to the make and model of the device. Refer to the user’s manual  
included with the camcorder or camera for more detailed instructions.  
S
WB  
AV2  
4-IN-1 A/V jack  
S-Video  
connector  
B
R
W
Y
4-IN-1 A/V cable  
AV connectors  
Note  
The cables are color-coded (black, red, white, yellow). Connect each color-  
coded cable to the appropriate connector on your device.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting External Speakers or Headphones  
External speakers or headphones may be used to listen to the TV rather  
than using the built-in speakers. Connect external speakers to the speaker  
line out port or headphones to the headphone port as illustrated.  
Headphones  
HEADPHONE/  
Headphone /  
Speakers line  
out jack  
Speakers  
Notes  
External speakers or headphones are not included with the TV.  
The internal TV speakers will not output sound when headphones are  
plugged in.  
Use external speakers with built-in amplifiers only.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting the Power Adapter  
1
Connect the power cord to the power adapter as illustrated.  
2 Plug the power adapter connector into the DC-IN input jack on the  
rear panel of the TV.  
3 Insert the three-pronged plug at the other end of the power cord into  
a power outlet.  
Three-pronged  
plug  
Power outlet  
DC-IN  
DC-IN  
Power cord  
Power adapter  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
9
Using the TV  
Using the Remote Control  
For best results, use the remote control within a distance of 16 feet  
(5 meters) from the front of the TV. Do not exceed an angle of 30 degrees  
when pointing at the TV.  
Notes  
The operational distance may be shortened when the signal sensor is  
directly exposed to strong light.  
Aim the transmitter on the remote control at the signal sensor and  
ensure that there are no obstacles between them.  
Turning the TV On and Off  
1
Press power  
TV.  
on the remote control or control panel to turn on the  
2 Press power  
again; the TV is in off mode.  
Selecting Channels  
Press channel up or channel down on the control panel to select the  
channel or enter the specific channel number by pressing the number  
buttons on the remote control.  
Switching Source Signals  
Press source to select the incoming source signal.  
The current source setting (TV/CATV, AV1, or AV2 ) appears on the upper  
left corner of the screen.  
Adjusting the Volume  
Press volume up to increase the volume. Press volume down to decrease  
the volume. The volume level is displayed on the screen.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
10 Adjusting On-Screen Display (OSD)  
Settings  
The On-Screen Display (OSD) menu system provides a quick and simple  
method to adjust your TV’s settings. This chapter describes how to change  
each of the available settings.  
The OSD can be used with either the remote control or the control panel.  
Remote Control  
Function  
Menu  
Control Panel Icon  
Menu  
Button  
Icon  
Menu  
menu/ENTER, M  
Channel  
up  
Right arrow  
CH (X /  
/ + / S)  
/ – / T)  
/ X  
Channel  
down  
Left arrow  
Enter  
/ W  
CH (W /  
Enter  
Menu  
menu/ENTER, M  
Note  
The following sections explain how to adjust settings in the OSD menus  
using the control panel.  
OSD Setting Menu  
Main Menu  
ETC  
Press menu to enter the OSD  
Main Menu screen.  
The Main Menu appears  
Brightness  
30  
Note  
To exit the OSD menus, press channel up or channel down to select Exit  
. Then press menu to exit the OSD menus. Also, after you finish setting  
OSD parameters, follow these instructions to exit the OSD menus.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Brightness  
1 Press menu. The brightness slide bar  
is highlighted.  
Main Menu  
ETC  
2 Press channel up to increase the  
brightness.  
Brightness  
3 Press channel down to decrease the  
brightness.  
30  
4 Press menu to confirm the setting  
and return to the Main Menu.  
Note  
The new setting is confirmed  
automatically when the OSD times out.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Contrast  
1
Press channel down or channel up to  
select Contrast.  
Main Menu  
ETC  
2 Press menu. The contrast slide bar  
is highlighted.  
Contrast  
3 Press channel up to increase the  
contrast.  
30  
4 Press channel down to decrease the  
contrast.  
5 Press menu to confirm the setting  
and return to the Main Menu.  
Note  
The new setting is confirmed  
automatically when the OSD times out.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Video Setting  
Press menu to enter the OSD  
Main Menu screen.  
Main Menu  
1
Press channel down or  
channel up to select Video  
Setting.  
ETC  
Video Setting  
2 Press menu to enter the Video  
Setting menu.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Hue  
1
Press menu to enter the Hue  
submenu.  
Video Setting  
G
B
R
2 Press channel up to increase green  
and decrease red.  
Hue  
3 Press channel down to decrease  
green and increase red.  
G
R
4 Press menu to confirm the setting  
and return to the Video Setting  
menu.  
Note  
The new setting is confirmed  
automatically when the OSD times out.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Saturation  
1
Press channel down or channel up to  
select Saturation.  
Video Setting  
G
R
B
2 Press menu to enter the Saturation  
submenu.  
Saturation  
3 Press channel up to increase the  
saturation.  
127  
4 Press channel down to decrease the  
saturation.  
5 Press menu to confirm the setting  
and return to the Video Setting  
menu.  
Note  
The new setting is confirmed  
automatically when the OSD times out.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sharpness  
1
Press channel down or channel up to  
select Sharpness.  
Video Setting  
G
B
R
2 Press menu to enter the Sharpness  
submenu.  
Sharpness  
3 Press channel up to increase the  
sharpness.  
4 Press channel down to decrease the  
sharpness.  
5 Press menu to confirm the setting  
and return to the Video Setting  
menu.  
Note  
The new setting is confirmed  
automatically when the OSD times out.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Color Temperature  
1
Press channel down or channel up to  
select Color Temp.  
Video Setting  
G
R
2 Press menu to enter the Color  
Temperature submenu. There are  
three default color temperatures to  
Choose from.  
B
Color Temp.  
Standard Color  
Press channel down or channel up to  
select Standard, then press menu.  
Warm Color  
Press channel down or channel up to  
select Warm, then press menu.  
Cold Color  
Press channel down or channel up to  
select Cold, then press menu.  
Note  
The new setting is confirmed  
automatically when the OSD times out.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.